AquaMaster E Series Pro EC Temp Meter

• Remove the protective cover
• Gently clean the electrode with distilled water and dry it off
• Press the On/off button to start the meter
• Insert the meter upright into the solution up to the edge and stir gently. Wait a few seconds for the correct value to appear on the display
• Press the C/F button to switch between Celsius and Fahrenheit
• Rinse the electrode with water after use and press the On/off button to turn off the meter

• 1x Digital EC Temp meter E50 Pro
• 1x User manual
• 3× 1.5 Volt AG-13 button cell battery

• Range: EC: 0.0 ~ 19.9 mS/cm / Temp.: 0°C ~ 50°C (32°F ~ 122°F)
• Resolution: EC: 0.1 mS/cm / Temp.: 0.1 ºC (1.0ºF)
• Accuracy: EC: ± 2% F.S. / Temp.: ±0.5°C (32°F) / Temp. compensation: 0°C - 50°C (32°F - 122°F)
• Calibration: EC: 1 point auto 1.4 EC
• Features: Battery indicator & automatic temp. compensation
• Power supply: 3 × 1.5 Volt AG-13 button cell battery (included)
• Auto. power-off: After 8 minutes
• Calibration indicator: With correct calibration
• Waterproof: IP67
• Dimensions: 8.66" x 1.6" x 1.6"
• Weight: 0.22 lbs

The E300 Pro is the ideal meter to measure the EC and temperature of coconut soil and other moist, soft substrates and liquids. The meter features a modern and robust housing with easy to operate buttons. The E300 Pro includes an EC electrode of unprecedented quality. The meter is delivered fully calibrated and includes batteries.

How does the meter work?

• Connect the PIN connector of the electrode to the EC meter
• Rinse the electrode with running water and dry it using clean kitchen paper
• Press the on/off button to turn on the meter
• Place the electrode in the (soft) substrate (make sure the substrate is well wet/damp, otherwise the meter will not work properly) or liquid to be measured
• Wait for the value to stabilise. The measurement is now complete
• Press the HOLD button to save the measurement. Do not forget to press the HOLD button again when the meter is used once more
• Rinse the electrode with clean water after use, so that no residue is left on the electrode
• Press the on/off button to turn off the meter

This package contains:

• 1x Digital Substrate EC/Temp meter E300 Pro
• 1x User Manual

Specifications

• Range: EC: 0.0 ~ 19.9 mS/cm / Temp.: 0°C ~ 50°C (32°F ~ 122°F)
• Resolution: EC: 0.1 mS/cm / Temp.: 0.1 ºC (1.0 ºF)
• Accuracy: EC: ± 2% F.S. (0.0 ~ 4 mS/cm) / Temp.: ±0.5°C (32°F) / Temp. compensation: 0°C - 50°C (32°F - 122°F)
• Calibration: EC: 1 point auto 1.4 EC
• Features: Battery indicator & automatic temp. compensation
• Power supply: 3 × 1.5 Volt AG-13 button cell battery (included)
• Auto. power-off: After 8 minutes
• Calibration indicator: With correct calibration
• Waterproof: IP65 (electrodes are IP67 waterproof)
• Dimensions: 8.66" x 1.57" x 1.57"
• Weight: 0.37 lbs