AutoPot In-line Taps & Filters

 AutoPot 6mm/9mm In-Line Tap

 They can be inserted in-line just after the connection to the 30 or 47 ltr tanks. Allowing you to turn off the water supply if you need to undertake any maintenance. They can also be added to the end of a layout so that now and again you can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.

16mm in-line tap:

They can be added to the end of a layout when you are using hosepipe (16mm pipe). You can open the tap and allow the lines to be flushed, removing a sediment or lime scale build-up that might occur over time. This will only take a couple of minutes and only needs to be done every couple of weeks.

FlexiTank Tap

During the initial assembly, the large threaded end is pushed through the main port in the lower FlexiTank body. The washer and nut included with the Tap fitting are then placed over and tightened on the threaded end.

The Click-Fit Tap outlet that remains on the outside of the FlexiTank allows you to attach a standard 1/2” Green Hose Connector, a 1/2” Click Fit Tank Adaptor and Filter  or a 1/2”-1/4” Click Fit Tank Adaptor and Filter.

***All FlexiTank and FlexiTank Pro models include a FlexiTank Tap as standard***