HydroLogic
HydroLogic Membrane Filter (CLEARANCE 30% OFF)
HydroLogic Membrane Filter (CLEARANCE 30% OFF)
Regular price
$79.99 CAD
Regular price
Sale price
$79.99 CAD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
CLEARANCE FINAL SALE!
AUTO DISCOUNT AT CHECKOUT!
HydroLogic membrane filters use reverse osmosis (RO) to push water through a tight microscopic barrier, removing up to 98% of dissolved minerals and impurities. They are mostly used in gardening and hydroponics to create ultra-pure water.
Key Facts
- How it works: Imagine a microscopic net that only allows water molecules to pass while trapping larger salts and chemicals.
- Lifespan: Replace your membrane every 6 months to 2 years, depending on your local water quality.
- Replacement indicators: Replace the filter if water production slows or the filter removes less than 90% of total dissolved solids (TDS).
- Setup: You must always use sediment and carbon pre-filters before the RO membrane. These pre-filters remove dirt and chlorine, preventing them from damaging the membrane.
Replacement Models
- Stealth-RO 150/300: These units use the Stealth-RO 150™ Membrane, filtering up to 150 gallons of pure water per day.
- Evolution-RO: This high-flow system uses dual dry membranes and a ChloraShield® Filter for chloramine removal.
Membrane 150GPD for Stealth-RO
Product Code: 143227
Filters up to 150 GPD (gallons per day) of ultra-pure, low PPM water. Reduces 98% of PPM of total dissolved solids. Replace when product water flow rate decreases and or when PPM increase. Discard all water to drain for 1 hour prior to use. Stealth-RO150 uses one membrane/Stealth-RO300 uses two membranes.
IMPORTANT: Using non-original filters or membranes will VOID warranty.
Specifications
IMPORTANT: Using non-original filters or membranes will VOID warranty.
Specifications
- 96% – 99% PPM Rejection
- Membrane type : Thin film composite
- Maximum operating temperature: 113°F (45°C)
- Maximum operating pressure: 100 PSI
- Maximum feed flow rate: 2 GPM
- Maximum feed water turbidity: 1 NTU
- Maximum feed sit density index (SDI): 5 SDI
- Chlorine tolerance: <0 PPM)
