HydroLogic
HydroLogic Pressure Booster Pump
HydroLogic Pressure Booster Pump
Couldn't load pickup availability
HydroLogic Pressure Booster Pump
110V Merlin:
This pump is designed to be installed before the Merlin-Garden Pro to boost the inlet pressure. There needs to be at least 40 psi and up to 80 psi of inlet pressure for the Merlin-Garden Pro to function properly. People on wells and other situations of low pressure can benefit greatly from this pump. It boosts the pressure up to 65 psi allowing the Merlin-Garden Pro to run with higher flow and efficiency while having better TDS removal. The 5 diaphram pump, specifically designed for the Merlin, is a workhorse but runs quietly. Comes with 120v cord and 1/2" quick connect fittings.
110V StealthRO:
Connects inline before the system. Boosts pressure to 65 psi for optimum flow rate. For low pressure (below 40 psi) situations or those wanting higher flow rates. With 3/8" QC fittings, high pressure switch and low voltage transformer.
110V for EvolutionRO 1000:
Adjustable pressure dial. Direct 110V plug in. Includes pump protector / inlet filter and 1/2" QC fittings. Does not thermally cycle. Designed to run continuously 24/7. A work horse pump that will power your Evolution-RO1000 to 80 psi and is compatible with other 1000-1500 GPD RO systems to boost them up to 150 psi. Pump requires a minimum of 20 psi to operate. An Electronic Shut Off Kit is not required, our 3/8" float valve is all that is needed to automate the filling of a storage tank. 110V - 7.8 amps.
